Apeks ATX40 + Octo
Apeks ATX40 + Octo

First Stage:

  • Unique over-balanced, diaphragm design
  • 1 HP port and 4 LP ports are available
  • An environmental dry system keeps water out of the main chamber

Second Stage

  • Pneumatically-balanced second stage
  • The large purge button on the ATX is easy to operate even with thick gloves
  • The integrated venturi control provides a performance boost at depth while preventing unwanted freeflow at the surface.
  • The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue
  • A heat exchanger (patented)
  • Offers a compact, integrated exhaust tee
R6,958.00 Select options
Apeks Flight
Apeks Flight
1st Stage
  • 4 medium pressure ports 3/8 inch UNF
  • 2 high pressure ports 7/16 inch UNF
  • Strong skeletal body
  • In line hose position
  • 2 Shot moulded
  • Weight of A Clamp: 459g
2nd Stage
  • Impact protection
  • Anti-snag yoke handwheel in A Clamp
  • Integrated Venturi System
  • Pneumatically balanced first and second stage for superior performance
  • Large tough purge
  • Excellent bubble diversion
  • Neutrally buoyant
  • Lightweight hose
R8,208.00 Select options
Apeks MTX-R Stage3
Apeks MTX-R Stage3
  • A first of its kind, over-moulded first-stage end cap and environmental diaphragm
  • Developed in accordance with the United States Navy Experimental Dive Unit extreme cold water test
  • Forged 1st stage body gives maximum thermal performance
  • Ribbed diaphragm clamp on the 1st stage ensures improved heat exchange in cold water conditions
  • Angled HP ports allow for optimal hose routing and transmitter fitting
  • Over-balanced diaphragm, environmentally sealed 1st Stage
  • Pneumatically balanced 2nd Stage
  • Protection from impact damage on both the 1st and 2nd Stage
  • Simple to use 2nd stage with a reduced chance of free flow
  • Double swivel hose for greater freedom and comfort.
  • Patented heat exchanger surrounds the valve mechanism, dissipating the cold caused by gas expansion while drawing in the warmth of the ambient water
  • Tested for Octopus use to 60 metres in cold water
*Does not include pressure gauge
R13,918.00 Select options
Apeks Sidemount Set
Apeks Sidemount Set

Sold as a complete set with:

  • 2 ea. XTX50 DIN regulators with 5 port swivel turrets
    • One XTX50 has a 83” / 210cm hose
    • One XTX50 has a 24” / 60cm hose
  • 2 ea. custom length MP inflation hoses (one for buoyancy system, one for drysuit)
  • 2 ea. brass pressure gauges with 6 inch hoses (units in PSI)
  • 1 ea. 90° elbow fitting
  • 1 ea. bungee necklace
  • 1 ea. stainless steel clip
  • 2 sets of short exhaust ports
  • Regulator bag to hold all
  • Setup illustration, CD manual and quick start guide
R24,644.00 Add to cart
Apeks SPG + Compass
Apeks SPG + Compass
  • The gauge case is made from nickel plated brass
  • The dial window is made of highly shock resistant material (anti-splinter polycarbonate)
  • A specially designed housing protects the gauge and HP hose fitting from accidental damage
  • A large loop area designed into the housing allows for easy attachment
  • There is an over-pressure capsule fitted in the back of the module to prevent the screen from exploding in the unlikely event of the internal mechanism failing
  • The compass ratchet bezel is robust and can be rotated with ease even with thick neoprene gloves
  • The numbers and directions on the compass bezel are large and very easy to read
  • The luminous compass dial with a vivid and clear display makes quick work of compass direction even in poor visibility
R3,705.00 Add to cart
Apeks Tech SPG
Apeks Tech SPG
  • The gauge case is made from nickel plated brass
  • The dial window is made of highly shock resistant material (anti-splinter polycarbonate)
  • There is an over-pressure capsule fitted in the back of the module to prevent the screen from exploding in the unlikely event of the internal mechanism failing
R1,530.00 Add to cart
Apeks Tek SET
Apeks Tek SET
Apeks has developed unique first stages specifically for use on a twinset. The benefits of this system are that there is a minimised risk of accidental snagging, no hose kinking and easier access to the manifold valves. Each first stage has three medium pressure ports and one high pressure port. They are over-balanced, cold water compatible and extremely robust. TEK3 looks great too! Not only is the TEK3 suitable for twinset use but it is equally suitable for single cylinder or stage cylinder configurations - offering perfect, snag-free hose positioning.
R20,513.00 Add to cart
Apeks Tungsten XTX + XTX40 Octo
Apeks Tungsten XTX + XTX40 Octo
1st Stage
  • FSR first stage
  • Over-balanced, diaphragm design
  • 2 HP ports and 4 MP ports are angled for optimum hose routing
  • Environmental dry system keeps water out of the main chamber
  • 40%O2 ready
2nd Stage
  • Diver Changeable Exhaust system (DCE)
  • Wider exhaust tee for minimal bubble interference
  • Pneumatically balanced
  • 40% O2 ready, out of the box / Can be cleaned to 100%
Octo: XTX40
  • Pneumatically-balanced second stage
  • The XTX purge buttons are large and easy to operate
  • Can be converted from a right-handed hose configuration to a left handed one
  • Braided flexi-hose
  • Nitrox ready out of the box
R14,772.00 Select options
Apeks XTX 200/XTX50
Apeks XTX 200/XTX50

First Stage:

  • Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth.
  • 2 HP ports and 4 MP ports are angled for optimum hose routing
  • An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out

Second Stage:

  • Pneumatically-balanced second stage results in smooth, easy breathing
  • The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used. Press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the center for the full effect of the purge, i.e. when regulator clearing etc.
  • The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.
  • Easy-to-grip opening effort control knob keeps the diver in control
  • The 2nd stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae.
  • A silicone exhaust valve improves the breathing performance of the regulator
  • The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue
  • A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water
  • A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water

Octopus:

  • he XTX50 Octopus has a breathing effort control knob
  • The XTX purge buttons are large and easy to operate
  • Can be converted from a right-handed hose configuration
  • Braided flexi-hose
  • Compatible with EAN40 out of the box
  • Pneumatically-balanced
  • The large venturi lever
  • A heat exchanger (patented)
R14,097.00 Select options
Apeks XTX 50 + Octo
Apeks XTX 50 + Octo
1st Stage
  • Chrome over marine brass
  • Over-balanced diaphragm design
  • Environmentally sealed
  • LP ports mounted on swivel turret
  • 40% O2 ready, out of the box
2nd Stage and Octo
  • Pneumatically balanced
  • Opening Effort Control Knob
  • Integrated Venturi Lever
  • 40% O2 ready, out of the box / Can be cleaned to 100%
R12,368.00 Select options
Aqualung Single SPG
Aqualung Single SPG
  • Easy-to-read scale up to 5,000 PSI / 350 bar rated
  • Luminescent gauge face for easy reading in low light
  • Integrated temperature scale
  • Nitrox compatible up to 50%
  • Swiss made, shock resistant Bourdon tube
  • One way safety valve
  • Hose length is 44cm
R1,595.00 Add to cart
Aqualung Titan Classic Combo
Aqualung Titan Classic Combo
1st Stage
  • The first stage is T-shaped as opposed to its predecessor making it more compact
  • Balanced-diaphragm
  • Features 2 HP ports and 4 LP ports
  • The outer skin provides impact protection as well as a cosmetic flair
  • Uses a conical filter for better filtration
  • Accepts an optional ACD (auto-closure device) system
  • Improved yoke screw eliminates trapped water
  • Compatible with EAN 40 new, out of the box
2nd Stages
  • Mid-size, high performance demand valve
  • Easy-to-grip venturi knob stops unwanted freeflow
  • Can easily be reversed from right-handed to left-handed configuration
  • Comes with Aqua Lung’s Comfo-Bite™ mouthpiece
  • A grid built into the exhaust tee creates finer exhaust bubblesy
  • Easy purge front cover
  • Reinforced polycarbonate material
  • The side openings on the front cover prevent freeflow
*Includes Titan Octo
R6,995.00 Select options