Apeks MTX-R Stage3
Apeks MTX-R Stage3
  • A first of its kind, over-moulded first-stage end cap and environmental diaphragm
  • Developed in accordance with the United States Navy Experimental Dive Unit extreme cold water test
  • Forged 1st stage body gives maximum thermal performance
  • Ribbed diaphragm clamp on the 1st stage ensures improved heat exchange in cold water conditions
  • Angled HP ports allow for optimal hose routing and transmitter fitting
  • Over-balanced diaphragm, environmentally sealed 1st Stage
  • Pneumatically balanced 2nd Stage
  • Protection from impact damage on both the 1st and 2nd Stage
  • Simple to use 2nd stage with a reduced chance of free flow
  • Double swivel hose for greater freedom and comfort.
  • Patented heat exchanger surrounds the valve mechanism, dissipating the cold caused by gas expansion while drawing in the warmth of the ambient water
  • Tested for Octopus use to 60 metres in cold water
*Does not include pressure gauge
R30,300.00 Select options
Apeks MTX-RC Pack
Apeks MTX-RC Pack
First Stage
  • Satin plated brass body with heat exchanging ribs for maximum thermal performance.
  • Break through, innovative over-moulded first-stage endcap and environmental diaphragm helps prevent ice build-up that can cause first stage free flow in extreme circumstances. Also protects the first stage from impact damage.
  • Ribbed diaphragm clamp for improved heat exchange in cold water conditions.
  • Unique over-balanced diaphragm design – as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a faster rate than ambient. This results in superior performance at depth.
  • 5 x medium pressure ports, 4 mounted on a rotating turret for improved hose orientation
  • 2 x angled high pressure ports for optimal hose routing and fitting of transmitters.
  • Double swivel hose for greater freedom of movement and comfort.
  • Easy to grip DIN hand-wheel or over-moulded yoke hand-wheel, only requires one hand to release.
  • DIN, Yoke and M26 Thread available, 300bar, 232bar and M26 300bar (O2) respectively.
  • Tested for Octopus use - EN250A to 60 metres cold water.
  • Nitrox/Oxygen compatible – Up to 40% O2 outside the EU (European Union), within the EU anything above 21% O2 must use an M26 Connection.
2nd Stage
  • Protective bumpers to protect the second stage from impacts and scratches in the most vulnerable places.
  • Ergonomic and simple to use venturi lever.
  • Oversize breathing effort adjuster makes adjustment easy in cold water whilst wearing gloves.
  • Large purge button.
  • Reversible second stage for either a left or right hand gas supply configuration.
  • A heat exchanger (patented) dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water for a more comfortable breathe.
  • Features an innovative Diver Changeable Exhaust system (DCE). The system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. The regulator is supplied with both sets of exhaust tees.
  • Comfo-bite mouthpiece
  • Flexible nylon braided hose, which has better cold water performance than traditional rubber hose.
  • Designed and manufactured in the UK.
  • No single use plastic in the packaging
R31,350.00 Add to cart
Apeks XL4 Combo
Apeks XL4 Combo
1st Stage
  • Compact machined first stage based on the expedition tested Apeks DS4 platform.
  • Breakthrough, innovative over-moulded first-stage endcap and environmental diaphragm helps prevent ice build-up that can cause first stage free flow in extreme circumstances. Also protects the first stage from impact damage.
  • Large surface area heat exchanger diaphragm clamp helps increase the gas temperature inside the first stage, resulting in improved cold water performance.
  • Unique over-balanced diaphragm design – as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a faster rate than ambient. This results in superior performance at depth.
2nd Stage
  • Compact and lightweight second stage improves comfort and helps reduce jaw fatigue on long-duration dives.
  • High performance pneumatically balanced lever operated poppet valve.
  • Large, over moulded self-flushing and controllable purge button.
  • Ergonomic Venturi lever is easy to use and locate.
  • Flexible nylon braided hose has better cold water performance than a traditional rubber hose.
  • Standard metallic hose connection for interchangeability.
  • Comfo-bite mouthpiece has a unique bridge that fits across the upper palate and does not require bite pressure to stay in place.
  • Re-useable mouthpiece clip makes it simple to change mouthpieces in the field.
  • Durable and flexible rubber exhaust tee provides excellent bubble diversion.
R26,650.00 Select options
Apeks XTX 200/XTX50
Apeks XTX 200/XTX50

First Stage:

  • Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth.
  • 2 HP ports and 4 MP ports are angled for optimum hose routing
  • An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out

Second Stage:

  • Pneumatically-balanced second stage results in smooth, easy breathing
  • The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used. Press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the center for the full effect of the purge, i.e. when regulator clearing etc.
  • The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.
  • Easy-to-grip opening effort control knob keeps the diver in control
  • The 2nd stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae.
  • A silicone exhaust valve improves the breathing performance of the regulator
  • The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue
  • A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water
  • A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water

Octopus:

  • he XTX50 Octopus has a breathing effort control knob
  • The XTX purge buttons are large and easy to operate
  • Can be converted from a right-handed hose configuration
  • Braided flexi-hose
  • Compatible with EAN40 out of the box
  • Pneumatically-balanced
  • The large venturi lever
  • A heat exchanger (patented)
R26,650.00 Select options
Apeks XTX50/XTX40 Combo
Apeks XTX50/XTX40 Combo
1st Stage
  • Uses the DST first stage
  • Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth.
  • 2 HP ports and 4 MP ports on a rotating turret are angled for optimum hose routing
  • An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out.
2nd Stage
  • Pneumatically-balanced second stage results in smooth, easy breathing.
  • The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used - press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the centre for the full effect of the purge, i.e. when regulator clearing etc.
  • The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.
  • Easy-to-grip opening effort control knob keeps the diver in control.
  • The second stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae.
  • A silicone exhaust valve improves the breathing performance of the regulator.
  • The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue.
  • A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water.
R24,450.00 Select options
Aqualung Titan Classic Pack
Aqualung Titan Classic Pack
1st Stage
  • Balanced-diaphragm
  • T-shaped making it more compact
  • Features 2 HP ports and 4 LP ports
  • Improved yoke screw eliminates trapped water
  • Compatible with EAN 40 new, out of the box
2nd Stages
  • Mid-size, high performance demand valve
  • Easy-to-grip venturi knob stops unwanted freeflow
  • Can be reversed from right-handed to left-handed configuration
  • Comes with Comfo-Bite™ mouthpiece
  • Reinforced polycarbonate material
*Includes Titan Octo
R12,995.00 Select options