Backplates

Showing all 4 results

Apeks WTX Backplate
Apeks WTX Backplate
  • Offered in either 304 stainless steel or 6061 anodized aluminum alloy
  • The stainless steel weighs approx 2.2 kg & the aluminum weighs approx 753g
  • 4 each upper and lower slots accommodate nylon cylinder bands so a single cylinder can be strapped directly to the plate. Having a series of 4 slots provides lateral stability of the cylinder that traditional 2 slot plates cannot
  • 3 holes at the top of the plate offer a range of height adjustments for the buoyancy cells and the cylinders.
  • Lower center slot allows for lower band bolts that are misaligned
  • 2” wide crotch strap slot, Upper and lower perimeter holes along either side and holes along the bottom allow for the mounting of accessories
R6,085.00 – R6,350.00 Select options This product has multiple variants. The options may be chosen on the product page
Scubapro S-Tek Back Pad Colour Kits
Scubapro S-Tek Back Pad Colour Kits
  • Moulded from durable Monprene® material.
  • Each colour pad kit includes a back pad and all mounting hardware.
R790.00 Select options This product has multiple variants. The options may be chosen on the product page
Scubapro S-Tek Pro Harness
Scubapro S-Tek Pro Harness
  • Moulded Monprene® pads cushion shoulders, waist and back to give superior comfort.
  • Two pre-bent D-rings on the shoulders, two D-rings on the waist and two D-rings on the crotch strap are provided for clipping gear.
  • Branded silicone epaulette on the left shoulder and branded silicone guide bands keep the corrugated hose, inflator hose and straps neatly in place.
  • Stainless steel backplate offers Evo-Angle webbing slots plus mounting points for trim pockets, an argon tank for dry suit and light battery canister, plus a convenient built-in carry handle.
  • Backplate offers a rationalised hole count and positioning as well as webbing bolt hole alignment to increase diver comfort.
  • The backplate features fully radiused edges and a softened organic shape with recessed wingnut sockets.
  • 2 x S-TEK Ergo Nuts – ergonomically designed for easier tightening and loosening of tanks onto the backplate even with cold, wet or gloved hands. Flush mounted to prevent suit abrasion and able to accept varying nut sizes.
  • The backplate is available in Stainless Steel or Anodized Aluminium.
R8,095.00 Select options This product has multiple variants. The options may be chosen on the product page
Scubapro S-Tek Pure Harness
Scubapro S-Tek Pure Harness
  • A continuous webbing harness provides a custom, individualized fit.
  • Configuration options include a fixed-shoulder length harness for ultimate simplicity or Extender mode that allows the shoulder straps to extend for easier doffing & donning.
  • The stainless steel waist buckle allows a full range of adjustments.
  • 3D formed backplate features a softened organic shape, curved central profile and fully radiused edges for greater comfort
  • EVO Angle webbing slots allow for a more natural webbing routing that increases diver comfort and reduces abrasion.
  • Recessed Wing Nut Socket features S-Tek Ergo Nuts that are ergonomically designed to be used with cold, wet or gloved hands, easy to tighten/loosen and flush-mounted to prevent suit abrasion. The recessed Wing Nut socket is also compatible with standard wing nuts.
  • The backplate provides mounting points for trim weights, an argon tank mounting point and a convenient built-in carry handle.
  • Branded silicone epaulette on the left shoulder and branded silicone guide bands keep the inflator hose and straps in place.
  • Two pre-bent D-rings on the shoulders, one D-ring on the waist, and two D-rings on the crotch strap are provided for clipping on extra gear.
  • The Backplate is available in Stainless Steel or Anodized Aluminium.
R5,995.00 Select options This product has multiple variants. The options may be chosen on the product page