Sidemount
Showing all 7 results

Apeks Sidemount Set
Sold as a complete set with:
- 2 ea. XTX50 DIN regulators with 5 port swivel turrets
- One XTX50 has a 83” / 210cm hose
- One XTX50 has a 24” / 60cm hose
- 2 ea. custom length MP inflation hoses (one for buoyancy system, one for drysuit)
- 2 ea. brass pressure gauges with 6 inch hoses (units in PSI)
- 1 ea. 90° elbow fitting
- 1 ea. bungee necklace
- 1 ea. stainless steel clip
- 2 sets of short exhaust ports
- Regulator bag to hold all
- Setup illustration, CD manual and quick start guide

Apeks WSX-25 SIDEMOUNT SYSTEM
Bladder:
- 27lbs lift
- Armoguard exterior
- Additional protective layer of Armoguard protects the bladder against abrasions in confined spaces
- Reversible inflator can be mounted on left or right side
- Grommets at lower corners allow for mounting bungee to keep the bladder streamlined to your body
- Solid 2” (5cm) webbing comes pre-assembled
- Removable crotch strap made of 2” (5cm) soft webbing
- 4x two inch stainless steel D-rings (2 angled on shoulders, 1 angled and 1 flat on the crotch strap)
- 2x “SlideLock” sliding stainless steel D-rings on waist strap allow for easy adjustment of cylinders throughout the dive
- 2x stainless steel drop D-rings along the lower back are for connection to the the included butt pack, or for marker buoys, reels or other accessories
- Heavy-duty waist buckle made of stainless steel
- Two-piece stainless steel plate allows the torso length to be adjusted to fit any diver
- Zippered Butt Pack with stainless steel snap hooks included
- Weight pouches are mounted on the spine strap and hold over 18lbs (9kgs) of weight
- Comes complete with two sizes of bungee and five stainless steel bolt snaps
- Two grommet strips allow the diver to adjust the weight pouch and bladder based on their specific requirements

Hollis SMS Katana
- Bulletproof Construction
- 35 lbs. of lift. The perfect wing size & weight for travel.
- One size fits all “H” harness
- 3 weight pockets: two 5 lb. (2.26 kg) and one 3 lb. (1.36 kg)
- 8 strategically placed D-rings: 2 on each shoulder strap, 1 on each hip/shoulder strap connection point and 2 rear, one left and one right, for securing main tanks or other accessories.
- Reversible Inflator & Dump assembly
- Primary bungees integrated into the wing to pull tanks up and away from diver’s torso
- Retainers located to avoid overhead interference
- Rigging Kit not included

Hollis SMS100
- 360 Degree wing - 52 lbs Lift
- Bulletproof Construction
- Single or Dual wing options available
- Centrally and uppermost located elbow to avoid overhead interference
- Upper/Lower cam band slots for rear mounted single tank
- Full visibility over your system
- Reduces additional gear: Doubles bands / Hardware / Manifold - Benefit when traveling
- Aids in transporting gear to and from the beach or boat - one tank at a time
- Streamlines profile which in turn reduces drag increasing your bottom time

Hollis SMS50
|
|

Hollis SMS50 Sport
- Traditional over the shoulder inflator routing
- Full visibility over your system
- Streamlines profile which in turn reduces drag increasing your bottom time
- Built-in trim pockets
- Removable shoulder pads
- Ready out of the box!
- Air Cell - 23 lbs Lift
- Sidemount Only harness
- System weight 5lbs

Hollis SMS75
- Trapezoid shape to promote horizontal trim
- Adjustable and removable wing bungee
- Designed for cave or open water sidemount
- Cam slots for single tank and grommets at 11” for banded doubles
- Reversible Inflator & Dump assembly
- Rigging kit: Tank bungees, SS Cam bands, SS Bolt snaps & nylon line
- Includes sternum strap & crotch strap
- Inner located elbow to avoid overhead interference